10 |
www.HandiQuilter.com
December, 2019
9. Attach the other L-brackets: Insert two (2) M6 x 10mm socket cap screws into the holes on the inside
of the side arm and use the 4 mm hex tool to tighten the screws to secure side arm to the L-bracket.
Repeat on the other side of the frame.
Set up for an 18-inch machine:
I
f you are setting up the frame
for an 18-inch machine, align the
holes in the L-bracket with the
side arm holes as shown in the
figure at the right (front two holes
on the side arm).
G
Set up for an 18-inch machine.
Set up for 16-inch machine:
If you are setting up the frame
for a 16-inch machine, align the
holes in the L-bracket with the
side arm holes as shown in the
figure at the right (back two
holes on the side arm).
G
Set up for a 16-inch machine
