HandHeld Nautiz X4, Руководство пользователя

Страница: 43 / 71

NAUTIZ X4
Manual Version 1.1
42
handheld
6.6. Using Demos
Handy Terminal Demos are software utilities loaded on all Handy Terminal terminals that demonstrate the
advanced features of the terminal. There are two Demos that feature the image engine: Image Demo and
Scan Demo.
To access these demos, tap
Start -> Demos .
• Select
Scan Demo to verify decoding, or
• Select
Image Demo to verify imaging (not available on device using the N4313 laser engine).
6.7. Decoding
The Handy Terminal supports Full-area Imaging decode mode.
Full-area Imaging
With full-area imaging the Handy Terminal supports omni-directional aiming meaning that a positive
read can be obtained from many positions. For details, see Omni-Directional Scanning Positions on
paragraph 6.10.
6.8. To Decode a Bar Code
1. Tap Start -> Demos -> Scan Demo .
2. Position the Handy Terminal over one of the Sample Bar Codes on paragraph 6.9.
A range of 4
–10 inches (10–25 cm) from the bar code is recommended.
3. Project the aiming brackets by pressing and holding the
Scan key. The Scan LED lights red.
4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code
to achieve optimal decoding; Omni-Directional Scanning Positions on paragraph 6.10.
5. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.
6.9. Sample Bar Codes
You can use the following bar codes to verify decoding:
Code 39 PDF 417