[email protected]
handandeyestudio.co.uk
©Oc
tober 202
1
Lighting for all the senses.
Melina Wall Light
Instructions
1/2
1. Wago connectors x3
2. Live cable connection
3. Neutral cable connection
4. Earth termination cable connection
5. Brass wall mount
6. G9 lamp holder
7. Screws for wall connection x2
8. G9 LED lightbulb (not supplied)
9. Glass shade and pre attached threaded metal attachment
Diagram 1
Exploded view of the Melina Wall Light
Diagram 2
Electrical connections and attaching to the wall
Attaching & connecting the Mela light
Steps
1
Prepare the ceiling / wall
Make sure the ceiling or wall location has been suitably
prepared allowing for a secure fixing substrate that can
take the weight of the light. We recommend the light is
fixed to a timber / timber pattress behind the wall.
2 Connect to mains electrics
Connect the pre -installed electrical cables to the mains
supply using the Wago connectors and ensuring the
correct polarity (see diagram 3).
Connections and excess cables can be housed in the
brass wall mount.
Note!
•
Always use a professional electrician
•
Ensure the mains electrics are OFF prior to making
the electrical connections
•
If cables are cut on-site, remember to leave earth
cable longer than the live/neutral cables to ensure
earth continuity.
3 Secure the brass wall mount
Now that the connection has been made the brass wall
mount can be secured to the ceiling or wall. The provided
wall screws are supplied as an example, ensure suitable
screws / fixing method are used depending on your wall
substrate!
The wall mount should be flush to the wall and no
movement should occur.
Note!
•
A foam gasket is pre installed to the back of the
brass mount to ensure the IP rating. This can only
be removed if installed in IP20 locations.
1
5
7
6
8
9
2
4
3
