Hand Held Products Quick Check Bar Code Verifiers 800, Руководство пользователя

Страница: 38 / 120

3 - 14 Quick Check® 600/800 Series User’s Guide
• When you have the AutoPrint/Store feature turned on, but no printer is
connected to your verifier, or your printer is connected, but is turned off, your
scan results are automatically stored in the verifier’s memory.
• When you have the AutoPrint/Store feature turned off, after each scan you
need to instruct the verifier to print your data (if a printer is connected and
turned on) or to store your data (if a printer is not connected or is turned off).
The default is setting for AutoPrint/Store is ON .
Scan Profile
The Quick Check 600/800 Verifier allows you to print the scan profile which is a
record of the reflectance values seen by a scanner as it moves across a symbol.
The scan profile is the basis of ISO/IEC evaluation and is usually presented in a
graphic form.
• When you use the AutoPrint/Store feature with Profile, you can choose to
have the scan results stored so you can later print a graphic scan profile on a
printout.
• When you use AutoPrint/Store without Profile, the raw data is not stored.
♦
To change the output options:
1. Display the menu that begins with Print Results (press POWER and then
SELECT ).
2. Set the cursor on the asterisk next to Change Settings and then press
SELECT . A menu that begins with Specifications appears.
3. Set the cursor on the asterisk next to Output Options and then press
SELECT . A menu that contains Display Options and Printout Options
appears.
4. To change the display options :
• To change the display options, set the cursor on the asterisk next to
Display Options and then press SELECT . A menu with four display
options selections appears.
• To change the data displayed in the upper (3rd line) or the lower (4th
line) parameter result line, set the cursor on the asterisk next to
UpperLine and then press
SELECT or
→
. The cursor moves to the
right of the term. Press
↑
and
↓
until the name of the data that you
want to show up on the parameter result line appears. To save the
selection, press
SELECT or
←
. The cursor moves back to the asterisk
next to the term.
• To change the error override feature, set the cursor on the asterisk
next to Error Override and then press SELECT or
→
until the setting
you want, YES (Y) or NO (N), appears.
• To change what the LEDs indicate, set the cursor on the asterisk next
to LEDs and then press SELECT or
→
until the setting you want, P/F
Criteria or Bar Growth!, appears.
• Press POWER to return to the menu that contains Display Options
and Printout Options.