Hand Held Products Quick Check 600 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 120

background image

Disclaimer

Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make
changes in specifications and other information contained in this document
without prior notice, and the reader should in all cases consult Hand Held
Products to determine whether any such changes have been made. The
information in this publication does not represent a commitment on the part of
Hand Held Products.

Hand Held Products shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent of Hand
Held Products.

©

2001-2007

Hand Held Products, Inc.

All rights reserved.

Web Address:

www.handheld.com

For European Community Users

Hand Held Products complies with Directive 2002/69/EC OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical
and electronic equipment (WEEE).

Waste Electrical and Electronic Equipment Information

This product has required the extraction and use of natural resources for its
production. It may contain hazardous substances that could impact health and
the environment, if not properly disposed.

In order to avoid the dissemination of those substances in our environment and
to diminish the pressure on the natural resources, we encourage you to use the
appropriate take-back systems for product disposal. Those systems will reuse or
recycle most of the materials of the product you are disposing in a sound way.

The crossed out wheeled bin symbol informs you that the product should

not be disposed of along with municipal waste and invites you to use the
appropriate separate take-back systems for product disposal.

If you need more information on the collection, reuse, and recycling systems,
please contact your local or regional waste administration.

You may also contact your supplier for more information on the environmental
performances of this product.

«
1
2
3
4
...
»

Содержание Quick Check 600 Series

























































































































Отзывы:

Нет отзывов

Похожие инструкции для Quick Check 600 Series

Бренд: Custom Audio Electronics Страницы: 16

Бренд: Nisuta Страницы: 171

StrataScan 2755-LHR-3C

Бренд: Allen-Bradley Страницы: 68

Бренд: Bematech Страницы: 50

Бренд: IDTECH Страницы: 73

Бренд: Sun Microsystems Страницы: 22

Бренд: Kimaldi Страницы: 30

Бренд: Jinmuyu Страницы: 7

Бренд: Gemplus Страницы: 4

Бренд: Godex Страницы: 39

Бренд: Flash Страницы: 190

Бренд: Visionis Страницы: 18

Бренд: Johnson Controls Страницы: 4

Бренд: Marschall Страницы: 2

Бренд: RIOTEC Страницы: 4

Бренд: RIOTEC Страницы: 4

Бренд: IDTECK Страницы: 12

Бренд: Datalogic Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды