![background image](http://html1.mh-extra.com/html/hand-held-products/quick-check-600-series/quick-check-600-series_user-manual_589715014.webp)
1 - 8
Quick Check® 600/800 Series User’s Guide
♦
To Install the Batteries
1. Slide off the battery cover on the bottom of the unit.
2. Insert the four batteries into the compartment, matching the “+” on the
battery ends with the “+” on the bottom of the compartment, and press each
battery into place.
3. Slide the battery cover back in place.
Charging the Batteries
The Quick Check 600/800 Verifier uses rechargeable batteries. An AC charger
is supplied to recharge these batteries. The Quick Check 600/800 Verifier is
intended to be powered from the batteries, not directly from an adapter or AC
outlet. With a set of properly charged batteries, the unit operates continuously
for a minimum of 1.5 hours. When not in use, you can leave the unit connected
to the charger. To extend the battery life, battery manufacturers recommend you
fully charge the unit, use it until the batteries are
completely discharged, and then
fully charge the batteries.
A
Low Battery
message on the bottom line of the opening display may appear
when you power up your Quick Check 600/800 Verifier or during use. When this
message appears, you cannot scan bar code symbols, but you can perform other
operations, such as changing the settings. If you turn the unit off and then on
again, the
Low Battery
message may disappear momentarily, but reappears
when the batteries are discharged more.
The
Low Battery
message appears before the battery is completely
discharged to preserve proper unit operation. However, this message may
appear for a variety of other reasons including variations in battery power,
temperature, component efficiency, or rapid cycle time. If your battery has not
lasted for a continuous hour and a half of operation, and you suspect a low
battery is
not the cause for the message, turn the unit off and then on again. If
the message reappears immediately on power up, the batteries are discharged
and you should recharge the unit. If the message does not reappear, you can
continue to use the unit. If you think there is a problem with your batteries,
contact Hand Held Products.
♦
To charge the batteries:
1. Turn off the verifier.
2. Plug the AC charger into the port on the back of the unit.
3. Plug the AC charger into a VAC wall outlet.
4. The batteries start charging. If you have completely discharged the
batteries, charge them for a minimum of 12 hours. If the batteries are
partially discharged, charge them for less time.
5. After charging, remove the AC charger from the unit. The verifier is ready for
use.
Содержание Quick Check 600 Series
