![background image](http://html1.mh-extra.com/html/hand-held-products/nautiz-x3/nautiz-x3_user-manual_589753041.webp)
Configure the Bluetooth features of the device prior to establishing a Bluetooth
ActiveSync connection.
How to configure Bluetooth ActiveSync
Note: In order to improve security, the network bridge (particularly the Remote NDIS
adapter Connection Bridge) of a computer must be deactivated before connecting the
device to a computer with a networked connection. For further information relating to
the network bridge, refer to the Windows Online Help of the computer.
The following instructions correspond to computers running Windows XP with SP2 or
higher.
1. Activate Bluetooth on both devices and turn on detection mode. Ensure that the
devices are within 10m (30ft) of each other.
2. Double click Start > Settings > Configuration Panel > Bluetooth device.
3. Select the "Search for a Bluetooth Device" box and the "Allow a New Bluetooth
Device to Connect to This Computer" box under Options.
4. Select Receive (start connections from the device) after clicking Add on the COM
Port tab and click OK.
Click OK after checking the added COM port.
5. Click Start > ActiveSync.
6. Click File > Connection Settings.
7. Allow one of the following connections: Press Start > ActiveSync after selecting a
COM port whose number was checked in the previous step from the drop-down menu.
8. Choose a connection via Menu > Bluetooth.
Synchronisation will automatically start and the ActiveSync icon will appear at the
bottom right hand side of the Home Screen.
If certification is required, a password window will appear, enter a password (PIN
code) and press Enter and repeat this procedure on the other device. Passwords are
recommended for enhanced security and passwords should be between 1 and 16
characters and can be any combination of alphanumeric characters. If you are not going
to use a password, just click Next.
9. To disconnect the ActiveSync connection, click the ActiveSync icon on the Home
Screen and click Disconnect.
A2DP/AVRCP Services
A2DP/ AVRCP are used for connecting to high-quality stereo headsets.
1. Activate Bluetooth on both devices and set the Bluetooth devices to detection and
connection mode.
2. Ensure that the devices are within 10m (30ft) of each other.
3. Tap Add a Device after selecting Start > Settings > Connections > Bluetooth. The
NAUTIZ X3 will search for Bluetooth devices within range.
4. Select the stereo headset from the list and tap Next. A password prompt will be
displayed. For more details, refer to the user manual for the headset.
Note: If smart synchronisation is pre-configured or a pre-defined PIN is requested, the
password prompt will not be displayed.
5. Tapping Connection will pair NAUTIZ X3 with the stereo headset.
Содержание Nautiz X3
Страница 1: ...User s Manual Nautiz X3 ...