A password prompt will be displayed. If there is a specific password for the device,
enter the password at the prompt and tap Next. If there is no password for the device,
enter an arbitrary password and tap Next. Bluetooth will attempt to establish a pairing
with the device.
9. If there is a pre-defined password, the same message will appear in the other device
requesting the password. Enter the password to configure the synchronised connection
(if the password of the device is entered, there is no other tasks to perform on other
device).
10. When connected, a list of appropriate and supported services will appear.
11. Choose the service you want and tap OK. If you don‟t select the service, it will not
be synchronised even if the device is synchronised. If you don‟t select a service, the
password prompt will be displayed.
12. The device will appear in the list in the main panel. When both devices accept the
password, a reliable (synchronised) pairing is established.
Available Services
Some devices may not require a PIN, this depends upon the device certification.
Hands-free Services
Connect a Bluetooth headset
Pairing differs between Bluetooth headsets, and the device will only remember the
most recently connected headset. If a problem occurs while making a connection to a
headset, switch the headset to detection mode. For more details, refer to the user
manual for the headset. Only WAN audio will be transmitted to a headset. System
audio will be transmitted using the NAUTIZ X3 speaker. You can answer and make
calls using a hands-free profile.
1. Activate Bluetooth on both devices and turn on detection mode.
Содержание Nautiz X3
Страница 1: ...User s Manual Nautiz X3 ...
