Hand Held Products DOLPHIN 7600, Руководство пользователя

Страница: 65 / 108

Dolphin® 7600 Series User’s Guide Rev B 7 - 9
Configuring a Network Profile
You can configure a network based on an AP in range, create a new network, or modify the default (see page 7-7) network. Both
methods start on the Wireless Networks Tab (see page 7-7) and open the following tabs:
• Profile Info Tab on page 7-9
• WEP Mgmt Tab on page 7-10
• WPA Settings Tab on page 7-11
Note: The settings on these tab windows are interrelated. This means that selecting one may disable access to others.
To configure a network to an AP in range, double-tap one of the networks in the Configured Networks list (to make sure the AP
you want is in the Configured Networks list, select it in the Available Networks list and tap
Move to Configured .)
Double-tab the network or leave it selected and tap Properties . The Profile Info Tab (see page 7-9) opens.
Profile Info Tab
You create a network profile on the Profile Info tab.
Field Description
Network Profile If you are configuring a network from the list, the name that appears in this field is the same as the
name in the Configured Networks list and, by default, is the same as the broadcast SSID. This name
cannot be changed.
If you are adding a new network, this field is configurable.
Network Name This is the SSID of the AP. If the AP broadcasts its SSID, then this value is retrieved from the Available
Networks list and this field is completed automatically. If the SSID does not broadcast, then the field will
be active and you must manually enter the value here.
Peer-to-Peer
Group Select this option to have two or more client workstations communicate with each other without the
benefit of an AP, otherwise known as ad hoc mode.
You should also select
Do Active Scan and, on the WEP Mgmt tab, select Use key for data
encryption while entering a common key for both sides. WPA is not supported in this mode.