Hand Held Products DOLPHIN 7600, Руководство пользователя

Страница: 28 / 108

3 - 12 Rev B
1/17/2007
Dolphin® 7600 Series User’s Guide
Note: If the main battery is low and the terminal is in suspend mode, pressing the SCAN button does not wake the Dolphin
terminal; you must replace the discharged battery with a fully charged battery.
Checking Battery Power
Power icons appear in the command bar at the bottom of the window. For example, indicates a low battery. Double-tap on
this icon at any time to open the Power system setting. The Battery tab opens displaying the charge status of both the main and
backup batteries.
Note: To manually check battery power, also tap Start > Settings > Control Panel > double-tap Power .
Storage Guidelines
To maintain optimal battery performance, follow these storage guidelines:
• Avoid storing batteries outside the specified range of -4 to 122° F (-20 to 50°C) or in extremely high humidity.
• For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.
Guidelines for Battery Use and Disposal
The following are general guidelines for the safe use and disposal of batteries:
• Use only the battery supplied, recommended, or approved by Hand Held Products.
• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.
• Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines.
• Don’t short-circuit a battery or throw it into a fire. It can explode and cause severe personal injury.
• Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power.
• Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to
hold an adequate charge.
• If you are not sure the battery or charger is working properly, please send it to Hand Held Products or an authorized Hand
Held Products service center for inspection.