![background image](http://html1.mh-extra.com/html/hand-held-products/5080/5080_user-manual_589690019.webp)
5X80 Series Software Development Kit (SDK) User’s Guide
2 - 5
hhpGetErrorMessage
This function returns a text message describing the meaning of a Result_t error code. See
Error Codes
on page 3-1 for complete
descriptions.
Syntax
hhpGetErrorMessage
(
Result_t
nErrorCode,
P
TCHAR
ptcErrorMsg,
int nMaxChars
)
Parameter
Description
nErrorCode
Error code returned from one of the other 5X80 SDK functions.
ptcErrMsg
TCHAR buffer to hold error message string.
nMaxChars
Maximum number of characters that can fit in ptcErrorMsg including NULL.
hhpGetLastImage
This function causes the imager to transfer the last image captured to the host. If bWait is TRUE, the function will not return until
the image is fully received or an error occurs. If bWait is FALSE, the function returns immediately and you are notified when
image transfer has completed or an error has occurred. pImgTrans is an optional parameter and can be NULL. Setting the
appropriate bit mask for each item specifies active members of this structure. This function can be used to obtain the image from
the last barcode capture attempt as well as the last image from an image capture attempt.
Syntax
hhpGetLastImage
(
P
HHP_IMAGE
pImg,
P
HHP_IMAGE_TRANSFER
pImgTrans,
BOOL
bWait
)
Parameter
Description
pImg
Pointer to an HHP_IMAGE structure if bWait is TRUE. If bWait is FALSE, the parameter is ignored
and should be NULL.
pImgTrans
Optional pointer to an HHP_IMAGE_TRANSFER structure. This structure overrides (just for this call)
the current imager configuration, and specifies the pixel subsample, cropping rectangle, transfer
compression type, compression factor (for JPEG lossy transfer), and progress notification method.
If this parameter is NULL, the current imager configuration settings are used except for the progress
notification methods that must be specified for each call if notification is desired.
bWait
If TRUE, do not return until the image is received or an error occurs. If FALSE, return immediately.
One of the event notification methods must be enabled to receive notification on completion.
hhpNamedConnect
This function opens a connection to an imager. The connection must be closed by calling
hhpDisconnect
(page 2-4). The caller
can verify that the imager is connected by calling
hhpEngineConnected
(page 2-4).
Syntax
hhpNamedConnect
(
P
TCHAR
ptcConnectName,
PVOID
pStruct
)
Parameter
Description
ptcConnectName The name of driver for the hardware port, e.g., "COM1:" or "\\.\COM12."
pStruct
An optional structure that contains setup information for the hardware port, or NULL.
HHP_SERIAL_PORT_CONFIG
is used to configure a serial port connection.
Содержание 5080
