manualshive.com logo in svg

Hand Held Products 2020, Руководство пользователя

Поделиться
Скачать
Hand Held Products 2020 Скачать руководство пользователя страница 22

1 - 2

2020/4820/4820 i User’s Guide

Cordless System: Main Components

About the Battery

Use only the Li-ion battery packs provided by Hand Held Products.  The 
use of any battery pack not sold by Hand Held Products will void your 
warranty and may result in damage to your unit.

Power is supplied to the cordless image scanner by a rechargeable battery that 
is integrated in the image scanner handle.  Each image scanner is shipped with 
a battery.  (See

 

Product Specifications

beginning on page 

13-1

.)

Charging Information

The battery is designed to charge while the image scanner is positioned in the 
cordless base unit.  Refer to 

"2020 LED Sequences and Meaning"

on page 3-4 

for an interpretation of the Charge Status indicators.

•

Place the image scanner in the base that is connected to an appropriate 
power supply.

Battery Recommendations

•

Batteries are shipped approximately 30% to 60% charged and should be fully 
charged for maximum charge capacity.

in Handle

Battery Contained

Image Scanner

2020

Cordless Base

!

Содержание 2020

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды