manualshive.com logo in svg

Hand Held Products 2020, Системное руководство, Страница: 61 / 248

Поделиться
Скачать
Hand Held Products 2020 Скачать руководство пользователя страница 61

IMAGETEAM™ 2020/4620 System Manual 

3 - 5

Imager Modes

The IT4620 is capable of working in single imager mode, multiple imager mode, 
or with Blutetooth devices, other than the IT2020-5B base.

Unlinking the Imager

If the base has an imager linked to it, that imager must be unlinked before a new 
imager can be linked.  Once the previous imager is unlinked, it will no longer 
communicate with the base.  To unlink an imager from the base, scan the Unlink 
Imager bar code below.

Single Imager Operation

There are two link modes to accommodate different applications: Locked Link 
Mode and Open Link Mode.  Scan the appropriate bar codes included in the 
Open Link and Locked Link Mode explanations that follow to switch from one 
mode to another.  

Default = Locked Link Mode.

Locked Link Mode - Single Imager

If you link an imager to a base using the Locked Link Mode, other imagers are 
blocked from being linked if they are inadvertently placed into the base.  If you 
do place a different imager into the base, it will charge the imager, but the imager 
will not be linked. 

To use a different imager, you need to unlink the original imager by scanning the 
Unlink Imager bar code. (See  

"Imager Modes"

on page 3-5.)

Unlink Imager

* Locked Link Mode

(Single Imager)

Содержание 2020

























































































































































































































































Отзывы:

Нет отзывов