Han-Bond HB Series, Руководство пользователя

Страница: 6 / 58

www.han-bond.com
5
Chapter 1 safety notice
Please carefully read all the following instructions before using the flat jet cutting
machine:

Height of place the flat ink jet cutting cutting machine at work: not more than 1000
meters.

Working and storage temperature range of the machine:-15~40 degrees Celsius.

Working humidity range of flat jet cutting machine at room temperature:No more than
85% (25 C).

After the flat jet cutting machine placed, put the foot cup down, so as to ensure the
machine is placed stably without sliding.

Connect the machine to the rated voltage of the annex, the power supply is not stable, it
will cause flat jet cutting machine performance degradation, even burn down machine
power board.

Power plug should be inserted in the power socket with ground wire (do not remove the
top of the plug pin), to ensure the device to be well electrical grounding . If the machine is
not grounded, may be due to excessive accumulation of electric charge and discharge,
harm to the human body, it may cause the machine components burned.

Avoid connecting machine and high power devices to the same power socket(such as
shadow printing machine, air conditioning, air compressor, CNC machines and other
equipment); if in parallel with one power supply socket, please make sure the device
power shall not exceed the power supply socket wire can bear the maximum current.