EN
55
– to the right for a higher concentration.
– to the left for a lower concentration.
2.
Dissolve dirt by applying detergent with the jet set to a wide spray pattern against the dry surface.
3.
Work from below and upwards on vertical surfaces.
4.
Allow the detergent to act for 1 to 2 minutes, but do not allow it to dry.
5.
Rinse off the detergent from the surface from below and upwards.
STORAGE
1.
Switch off the high-pressure washer.
2.
Close the water tap.
3.
Empty the chemicals container.
4.
Relieve the pressure in the high-pressure washer by keeping the trigger pressed until no more
water comes out through the nozzle.
5.
Lock the trigger.
6.
Unplug the power cord.
7.
Treat the high-pressure washer with non-corrosive, non-toxic antifreeze before putting into
winter storage. NOTE: Rinse the high-pressure washer with clean water before using it again.
Antifreeze can damage washed surfaces.
10
Содержание HPW-140
Страница 58: ......
