Hamron 025956, Руководство по эксплуатации

Страница: 13 / 28

13
EN
SAFETY INSTRUCTIONS
• Read these instructions carefully before installation
and save them for future reference.
• Always comply with the applicable laws and
regulations for the installation and use of auxiliary
lights.
• Disconnect the negative/chassis earth cable from
the battery before connecting the product, to avoid
damage from short-circuiting during the installation.
• Follow as far as possible the existing cable routing
for installation of new cables.
• Secure the cable and any excess length (neatly
gathered) carefully with cable ties, electrical tape,
or the equivalent.
• Cable grommets through the firewall should be at a
safe distance from moving parts.
WARNING!
• The product must only be used within its rated
voltage range, 9 to 36 VDC.
• The light source gets hot when the product is
switched on. Allow the light source to cool for at
least 30 minutes before touching or handling it.