Hamron 005537, Руководство по эксплуатации

Страница: 14 / 15

EN
15
6. Switch off the compressor when the
correct pressure is obtained, remove the
valve connector from the tyre valve and
replace the valve cap.
USING ADAPTERS
1. Screw the right adapter on the valve
connector.
2. Press the power switch. The compressor
starts inflating automatically.
3. Switch off the compressor at regular
intervals to stabilise the pointer and read
off the pressure.
IMPORTANT:
Soft inflatable products might not have a
specified maximum pressure.
1. LED light
2. 12 V connector
3. 3 m power cord
4. Power switch [ON/OFF]
5. Air hose
6. Valve connector
7. Pressure gauge [PSI, bar or kPa]
FIG. 1
8. Adapters
FIG. 2
USE
NOTE:
• On some vehicles the ignition must be
switched on for the 12 V outlet to be
supplied with voltage.
• We recommend switching the engine on
while the product is in use to avoid
discharging the vehicle battery and to
ensure that the appliance receives
adequate voltage.
• Check that the vehicle is in neutral gear
and that the parking brake is on.
1. Unfold the cord and put the connector in
the vehicle’s 12 V socket. The status lamp
goes on remains on while the compressor
is connected.
2. Remove the valve cap from the tyre valve
and put it in a safe place.
3. Take the air hose from the compressor
and screw the valve connector on the tyre
valve. Screw the valve connector on firmly,
but do not overtighten.
4. Press the power switch. The compressor
starts inflating automatically.
5. Switch off the compressor at regular
intervals to stabilise the pointer and read
off the pressure.