7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan
Hanging the fan-motor assembly
Attaching the fan to the electrical
box
□
Turn the power off.
□
Securely attach the mounting plate (A) to the outlet box (FF)
using the two screws (LL) supplied with the outlet box (FF).
Pull the 120-volt supply wires (the black, white and ground
wires) out of the outlet box (FF) and through the hole in the
mounting plate (A) and lay them to the side.
□
Carefully lift the fan-motor assembly (B) and engage the
slot in the motor bracket on the top of the fan- motor
assembly (B) with the hook on the mounting plate (A) so
that it is securely suspended. Then connect the wiring
to your fan according to step 3 “Making the Electrical
Connections”.
□
Once the wiring is complete, lift the motor bracket on the
top of the fan-motor assembly (B) so that the four captive
screws (DD) in the motor bracket align with the four screw
holes (II) in the mounting plate (A).
□
Securely tighten all four screws (DD).
2
1
NOTE
: For better fan performance, make sure the
mounting plate is level. Additional washers (HH)
(not included) may be needed to insert between
the outlet box and mounting plate.
A
FF
LL
LL
A
B
DD
A
B
FF
