Installation (continued)
6
Green ground screw
3
Making the electrical connections
□
□
□
□
□
□
□
* Use wire connectors (CC) to connect the wires.
Ground Wire:
Wrap the supply ground wire around the green ground screw on
the crossbar assembly (AA), no less than 2 in. from the end of the
wire. Tighten the ground screw.
Connect the fixture ground wire to the supply ground wire with a
wire connector (CC).
Supply Wire:
Connect the supply white wire to the white fixture supply wire
with a wire connector (CC).
Connect the supply black (or red) wire to the black fixture supply
wire with a wire connector (CC).
Wrap each connection with approved electrical tape and carefully
insert all of the connected wires into the outlet box.
Attaching the fixture body to the outlet
box
AA
CC
□
□
4
Re-attach the backplate on the fixture body (A) to the
crossbar assembly (AA).
Secure with the previously removed mounting balls (1).
Installation Option 2:
Down light
Installation Option 1:
Up light
A
□
5
Installing the light bulb and the cage
Install the correct bulb (not included) referring to the fixture
markings and/or labels for maximum wattage.
NOTE:
Use one 60W maximum medium base (E26) type "S"
or 8W maximum medium base (E26) self-ballasted LED
vintage Edison bulbs (sold separately).
A
1
AA
