HAMPTON BAY Moonlight, Руководство пользователя

Страница: 12 / 15

Restore power to the ceiling fan and test for proper
operation.
1. "HI, MED, LOW" buttons:
These three buttons are used to set the fan speed
as follows:
LOW =Low speed MED = Medium speed
HI =High speed
2. "OFF" button:
This button turns the fan off.
3.The " " button turns the light ON or OFF and
also controls the brightness setting. Press and
release the button to turn the light ON or OFF.
Press and hold the button to set the desired
brightness. The light key has an auto-resume, it
will stay at the same brightness as the last time it
was turned off.
9. Operating Your Transmitter
Installing the battery:
Install 12V MN21/A23 battery (not included),
to prevent damage to transmitter, remove the
battery if not used for long periods.
Speed settings for warm or cool weather depend
on factors such as the room size, ceiling height,
number of fans, etc.
The Reverse switch is located on the top of
motor housing. Slide the switch to the Left for
warm weather operation. Slide the switch to the
Right for cool weather operation.
NOTE: Wait for fan to stop before changing the
setting of the slide switch.
Warm weather - (Counter-Clockwise direction)
A downward airflow creates a cooling effect.
(Fig. 19) This allows you to set your air
conditioner on a higher setting without affecting
your comfort.
Cool weather - (Clockwise direction) An upward
airflow moves warm air off the ceiling area. (Fig.
20) This allows you to set your heating unit on a
lower setting without affecting your comfort.
Figure 17
Figure 18