HAMPTON BAY Moonlight, Руководство пользователя

Страница: 11 / 15

Figure 15
Installing the Mounting
Plate
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 15)
REMEMBER: To disconnect the power. The fan
blades must be already attached to the fan.
Step 1. Remove 1 of the 3 screws from the
mounting plate and keep it for future use.
Loosen the other 2 screws. (Do not remove)
Step 2. Raise and hold the light kit close to the
mounting plate and proceed to do the wire
connections. Connect the white wire connectors
from the light kit and fan, follow the same
procedure with the black wire connectors. (Fig. 16)
Step 3. Tuck connections neatly into mounting
plate, Place the key holes on the light kit over the
2 screws previously loosened from the mounting
plate, turn light kit until it locks in place at the
narrow section of the key holes. Secure by
tightening the 2 screws previously loosened and
the one previously removed. (Fig. 16)
Step 4. Install 1x100W halogen bulb (included).
(Fig. 16)
Step 5. Raise glass shade up against bottom of
fan housing and secure it to the fan by turning
the glass shade clockwise until snug. DO NOT
OVERTIGHTEN. (Fig. 16)
Screws
Mounting plate
Mounting ring
Installing the Light Kit 8.
Figure 16
Connection plugs
Screws
Glass
shade
Bulb
Light kit
Mounting plate