Finishing the Installation
STANDARD CEILING INSTALLATION
Slide canopy up to the ceiling leaving a 1/8" clearance between the canopy and the
ceiling.(Fig. 10) Make sure you place the wires safely into outlet box. Secure the
canopy to the hanger bracket with the four screws with your fan. Slide the canopy
ring over the canopy and tighten by turning the ring.
FLUSHMOUNT INSTALLATION
Remove the fan from the hook on the hanger bracket. Secure the canopy to the
hanger bracket with four screws included with your fan.
Slide the canopy
ring over the canopy and tighten by turning the ring.
WARNING
Make sure the hook on the hanging bracket properly sits in the groove in the hanger
ball before attaching the canopy to the bracket by turning the housing until it drops
into place.
(Fig. 11)
7.
Allow 1/8"
Clearance
Allow 1/8"
Clearance
Figure 10
Figure 11
