Assembly
1
Attaching the Handle
□
Attach the handle (A) to the hose reel housing (B).
Press down on the handle (A) until you
hear a snap.
2
Attaching the Crank Handle
□
Attach the crank handle (C) onto the crank arm by inserting the
screw (D) through the crank handle (C). Tighten securely using the
Allen wrench (E).
4
3
Attaching the Leader Hose
NOTE:
When attaching the garden hose to the leader hose to
the In-Tube, be sure to attach correctly, cross threading could
cause permanent damage.
□
Connect the leader hose (F) to the In-tube on the exterior of the hose
reel.
□
Connect the opposite end of the leader hose (F) to the water supply.
□
Do not cross-thread the leader hose into the In-tube.
4
Attaching the Garden Hose
NOTE:
Check that the garden hose has a washer inside the
female coupler. If the washer is missing, consult your local
hardware store for the correct washer needed.
□
Insert your garden hose between the frame bars and connect to the
Out-tube. Turn on the water supply and check for leaks. If necessary
re-tighten connections.
IN-TUBE
OUT-TUBE
C
D
A
B
1
