11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan (continued)
Mounting the fan motor assembly
(standard mount)
6
WARNING:
When using the standard ball/downrod
mounting, the tab in the ring at the bottom of the
mounting bracket must rest in the groove of the
hanger ball. Failure to properly seat the tab in the
groove could cause damage to the wiring.
NOTE:
The magnet is pre-attached on the canopy bottom
cover for you to remove and install easily.
□
Align the locking slots of the canopy (C) with the two screws (SS) and
alignment post (QQ) in the mounting bracket (A).
□
Push up the canopy (C) and turn it clockwise until the alignment post
(QQ) engages to the round hole and the screws (SS) engage to the
key slots.
□
Firmly tighten the two mounting screws (SS).
□
Align the oval shape on the canopy (C) with canopy bottom cover (JJ).
□
Push up the canopy bottom cover (JJ) until the screw (SS) heads
engage to the slots on the canopy bottom cover (JJ) so that the
magnetic canopy bottom cover (JJ) can be attached to the bottom of
the canopy (C) properly.
Assembly - Attaching the Fan Blades
Attaching the fan blades to the
blade arms
1
□
Attach a blade (F) to a blade arm (G) by inserting screws (AA)
into the holes in the blade and through the blade arm (G). Note
that the rubber washers are pre-attached to the blade arm (G).
□
Tighten each screw securely.
□
Repeat these steps for each blade (F) and blade arm (G).
A
C
JJ
SS
Attaching the blade assemblies to
the fan
2
□
Attach the blade assembly to the motor assembly (E) by
aligning the screw holes on the blade arm (G) with the screw
holes on the bottom of the fan motor assembly (E).
□
Tighten the pre-installed blade arm screws.
□
Repeat this step for the remaining blade assemblies.
AA
G
F
E
G
