HAMPTON BAY Lonestar 52, Руководство пользователя

Страница: 7 / 17

3. Installing Your Fan
Tools Required
P h i l l i p s s c r e w d r i v e r , s t r a i g h t s l o t
s c r e w d r i v e r, a d j u s t a b l e w r e n c h , s t e p
ladder, and wire cutters.
Mounting Options
If there isn't an existing UL listed mounting
box, then read the following instructions.
Disconnect the power by removing fuses or
turning off circuit breakers.
Secure the outlet box directly to the
b u i l d i n g s t r u c t u r e . U s e a p p r o p r i a t e
fasteners and building materials. The outlet
box and its support must be able to fully
support the moving weight of the fan (at
least 50 lbs). Do not use plastic outlet
boxes.
Figures 1,2 and 3 are examples of different
ways to mount the outlet box.
Note: You may need a longer downrod to
m a i n t a i n p r o p e r b l a d e c l e a r a n c e w h e n
installing on a steep, sloped ceiling.
To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 4.
Outlet box
Outlet box
Provide strong
support
Recessed
outlet box
Mounting bracket
opening must be
toward the top
Outlet box
Figure 1 Figure 3
Figure 2
Figure 4
Angled ceiling
maximum
24 angle