HAMPTON BAY Lonestar 52, Руководство пользователя

Страница: 11 / 17

7.
Rubber
washer
Blade
bracket
Figure 11
Blade
Screws
Attaching the Fan
Blades
Step 1 Attach the blades to the blade brackets
using three screws and rubber washers as
shown in Figure 11. Start a screw into the
bracket, do not tighten. Repeat for the 2
remaining screws and washers.
Step 2 Tighten each screw securely starting
with the center screw. Make sure the blade is
straight.
Step 3
Fasten the blade brackets to the motor
by inserting the tab from the blade brackets to
the slot in the bottom motor housing, then
tighten the two screws and washers already
installed in the blade arms (Figure 12).
Step 4 Install an optional light kit if you wish.
Follow the instructions included with the kit.
Figure 12
Motor
Blade bracket
Slot
Tab