5
WWW.HOMEDEPOT.CA
Please contact
1-855-HD-HAMPTON
for further assistance.
Assembly
1
Assembling the support
2
Assembling the top beam and
canopies
□
Insert long supports (C) into both ends of each short support (D).
Then insert the other end of the long supports (C) into the tube
of beam connector (H), creating 90° angles.
NOTE:
To avoid destroying the finish, please handle it with
care.
□
Insert the small end of the top short beams (E) into top long
beams (F), then insert the top long beams (F) into three of the
top connectors (I). Place the big canopy (K) on the assembly
and do not unfold. Insert the fourth long top beam (F) into the
top connector (I).
□
Insert the other end of the top short beam (E) into the tube of
beam connector (H). Assemble the small canopy (J) to the top
of the assembly.
NOTE:
To avoid destroying the finish, please handle it with
care.
3
Attaching the upper post
4
Attaching the lower post
□
Insert the ends of the upper posts (A) with the spring buckle into
the tubes of the beam connector (H).
□
Insert the small ends of the lower posts (B) into the upper posts
(A). Then insert the other ends of the lower posts (B) into the
bases (G). Secure the gazebo to the ground using stake (AA)
through the bases (G)
