- 3 -
Assembly Instruction:
B
B
B
B
3
4
3
3
3
3
3
4
4
3
4
3
Fig.1
C
5
6
5
5
6
6
Fig.2
Fig.1
：
Attach two
＃
3 poles to a
＃
4 pole; then attach one B plastic connector to the end of #3 pole.
Repeat this procedure to form a square frame, as shown in Fig 1.
Fig.2
：
Attach #5 pole to the #6 pole, then attach the end of #6 pole to C top connector. Repeat this procedure to
form a top frame, as shown in Fig. 2.
C
B
B
B
B
3
4
3
3
3
3
3
4
4
5
6
5
5
6
6
Fig.3
1
C
B
B
B
B
1
1
3
4
3
3
3
3
3
4
4
5
6
5
5
6
6
Fig.4
1
2
B
B
B
A
A
1
2
1
2
3
4
3
3
3
3
4
5
Fig.5
E
H
I
A
Fig.5:
Install the big canopy (H) and small canopy (I) on the top frame but do not fully spread (H). Attach #2
poles to #1 poles and then insert the end of #2 into the base plate (A). Use stake (E) to hold the poles in
the ground. Finally, fully spread the big canopy. Reference to Fig 5 shown.
Fig.6:
Use the plastic loop (F) to hang the mosquito netting (J) onto the frame. Fasten the hook–and-loop on
the net. Use the rope (G) and rope pegs (D) to balance the whole gazebo. The rope should be aligned
with the ground at a 45° angle with each corner of the angle between the two ropes at 60°. Reference to
Fig 6 shown.
Fig.3:
Connect the square frame with the top frame by attaching the end of the
＃
5 poles to B corner
connectors, as shown in Fig 3.
Fig.4:
Insert
＃
1 poles into B corner connectors, as shown in Fig 4.
Fig.6
D
D
D
G
G
G
J
60°
G
D
D
G
G
D
45°
