ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture; lay out all parts on clean surface.
2. Turn off power at main fuse box.
3. Make sure the polarity of the track (1) and the track head (2) are the same turn track
head (2) in the proper direction to mount into track (1).
NOTE: If it is difficult to insert track head (2), try turning track head in opposite
direction, as the track head (2) should fit easily into track (1).
4. Make sure that locking pin of track head (2) is in place to ensure that track head (2)
is secured to track (1).
BULB INSTRUCTIONS:
1. Install 50W Max GU10 Bulb (3) (not included).
ASSEMBLY:
3. GU10 50W Bulb (not included)
2. Track Head
1. Track
Page 4
Page 5
