HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
11
KK
F
NN
G
MM
LL
Assembly — Installing the Switch Housing
8
Attaching the switch housing
mounting plate to the mounting ring
Attaching the switch housing to the
switch housing mounting plate
9
Remove one of the three switch housing mounting plate
screws (KK) from the mounting ring (LL) and loosen the
other two screws (KK). (Do not remove)
Place the key holes in the switch housing mounting plate (F)
over the two screws (KK) previously loosened from the
mounting ring (LL), and turn the switch housing mounting
plate (F) until the switch housing mounting plate locks in
place at the narrow section of the key holes.
Securely tighten the two switch housing mounting plate
screws (KK) previously loosened and the one previously
removed.
While holding the switch housing (G) under the fan, snap
together the wire connection plugs (MM).
Carefully push all wires back into the switch housing. Install
the switch housing (G) onto the switch housing mounting
plate (F) with the switch housing mounting screw (NN)
provided. Be sure to tighten all screws.
CAUTION:
Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse at the
fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
CAUTION:
Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse at the
fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
F
