8
Assembly — Close-to-Ceiling Mounting
1
Preparing the canopy
3
Assembling the fan
Preparing the motor
2
A
EE
EE
B
C
Remove the mounting bracket (A) from the canopy (B) by
loosening the four canopy mounting screws with lock
washers (EE) on the top of the canopy (B). Remove the two
non-slotted canopy mounting screws with lock washers (EE)
and loosen the slotted canopy mounting screws with lock
washers (EE).
Remove the canopy bottom cover (C) from the canopy (B).
Remove the cotter pin (FF) and clevis pin (GG), and two collar
set screws (HH) from the fan motor assembly (E) collar.
Remove three of the six collar mounting screws with lock
washers (II) (every other one) from the collar on top of the
fan motor assembly (E).
II
II
WARNING:
Failure to completely tighten the three collar
mounting screws with lock washers (II) could result in the fan
becoming loose and possibly falling.
Make sure the slot openings are on top, and then proceed to
place the canopy (B) over the collar at the top of the fan
motor assembly (E).
Align the mounting holes in the bottom of the canopy (B)
with the holes in the top of the fan motor assembly (E).
Fasten using the three collar mounting screws with lock
washers (II) previously removed.
Tighten the collar mounting screws with lock washers (II)
securely.
E
B
E
GG
FF
HH
HH
