HAMPTON BAY GLENDALE III AK338-MBK Скачать руководство пользователя страница 11

 

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

11

Assembly — Hanging the Fan (optional)

Single Switch Connections

6b

Dual Switch Connections

6c

On a single switch the fan and light can be turned on or off 
together. Make wire connections as follows, using the wire 
nuts (AA). 

Wall switch not included.

From Fan 

To Outlet Box

Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
Green Wires* ---------------- Green or Bare Wire (Ground)

On a dual switch the fan and light can be turned on or off 
separately. Make wire connections as follows, using the 
wire nuts (AA). 

Wall switch not included.

From Fan 

To Outlet Box

Black Wire (for Fan) --------- Black Wire (Hot #1)
Blue Wire (for Light) --------- Red Wire (Hot #2 but may 
 

be in a color other than black, 

                                               white or green)
White Wire ------------------- White Wire (Neutral)
Green Wires* ---------------- Green or Bare Wire (Ground)

AA

SINGLE SWITCH

AC IN

Black

KK

Neutral

Ground

conductor

White

Blue

Black

Green

White

Green

Outlet Box

A

Black

AA

Neutral

Ground

conductor

White

Blue

Black

Green

White

Green

AC IN

Red

DUAL SWITCH

Outlet Box

A

D

D

Содержание GLENDALE III AK338-MBK


















Отзывы: