7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE:
Use one 60W maximum medium base (E26) type "S"
or 8W maximum medium base (E26) self-ballasted LED vintage
Edison bulb (sold separately).
Installation (continued)
8
Using silicone sealer
□
□
□
Make sure the surface of the exterior wall and the fixture backplate are free of dirt.
Using silicone sealer (not included) start on one side of the fixture backplate and follow the contour where the fixture
backplate meets the exterior wall surface.
Proceed to seal around backplate.
NOTE:
To ensure proper moisture drainage, do not seal
bottom of fixture backplate.
□
□
□
□
7
Installing the cage and the light bulb
Remove the socket collar (2) from the socket on the fixture body (A).
Then, place the cage (B) over the socket on the fixture body (A) as shown.
Secure by threading the socket collar (2) onto the socket. Hand-tighten until snug.
Install the correct bulb (not included) referring to fixture markings and/or labels for maximum wattage.
A
B
2
