□
□
4
Making the electrical connections
Installation (continued)
6
AA
CC
Green ground screw
□
□
5
Installing the fixture body to the outlet
box
Reattach the backplate on the fixture body (A) to the
crossbar assembly (AA).
Secure with the previously removed mounting balls (1).
AA
A
1
□
□
Preparing the glass panels
6
Place the glass panels (C) into the cage (B) and secure
them with the metal tabs.
Repeat this step for the remaining glass panels (C).
B
C
Tab
Tab
Ground Wire:
1. Wrap the supply ground wire around the green ground
screw on the crossbar (AA), no less than 2 in. from the end of
the wire. Tighten the ground screw.
2. Connect the fixture ground wire to the supply ground wire
with a wire connector (CC).
Supply Wire:
1. Connect the supply white wire to the white fixture supply
wire with a wire connector (CC).
2. Connect the supply black (or red) wire to the black fixture
supply wire with a wire connector (CC).
3. Wrap each connection with approved electrical tape and
carefully insert all of the connected wires into the outlet box.
