8
Installation (continued)
8
Securing the canopy to the
ceiling
9
Applying caulk
□
Place the canopy (AA) over the mounting nipple
(GG), and ensure it is flush with the ceiling.
□
Screw the ring (HH) onto the screw collar loop (II)
until the canopy (AA) is held firmly against the
ceiling.
□
Caulk the space between the ceiling and the full
area of the canopy (AA) to prevent water seeping
into the outlet box.
Care and Cleaning
□
Clean the fixture with a soft, dry cloth.
□
Do not use any cleaners with chemicals, solvents or hash abrasives.
WARNING:
Before attempting to clean the fixture,
disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box.
Troubleshooting
Problem
Possible Cause
Solution
The bulb will not light.
The power is off.
Ensure the power supply is On.
The circuit breaker is off.
Ensure the circuit breaker is in the On position.
The fuse blows or circuit
breaker trips when the light is
turned on.
Crossed wires or power
wire is grounding out.
□
Check the wire connections.
□
Contact a qualified electrician or call the
Customer Service Team at
1-855-HD-HAMPTON.
