Installation
Turning Off the Power
Identifying the Wires
NOTE:
Make sure the mounting bracket (BB)
is installed with the label facing downwards.
NOTE:
Select the preferred color temperature
by using the switch behind the fixture (AA). Refer to the
“Color Select Instructions” section.
1
Connecting the Wires
4
Installing the Fixture
1. Feed the wires through the mounting bracket's (BB) center hole
into the junction box.
2. Raise the fixture (AA) to the mounting bracket (BB).
Align the arrows on the fixture (AA) to the mounting braket (BB).
3. Twist the fixture (AA) clockwise to lock in place firmly.
5
2
1. Line Voltage - Black, Neutral - White, Ground - Bare Copper
Installing the Mounting Bracket
to the Junction Box
3
1. Feed the junction box wires through the center
of the mountung plate (BB).
2. Attach the mounting plate (BB) to the junction box
using two J-box mounting screws (CC).
Junction Box
Line Voltage
Line Voltage
Neutral
Neutral
Connect the wires of the fixture to the wires from the J-box.
(Black to Line Voltage, White to Neutral and Ground to Bare Copper)
Turn the power OFF at the fusebox or the circuit breaker.
Ground
Ground
BB
BB
AA
CC
4
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
