10
Interior Bulb Replacement
Remove the 2 screws from the bulb access
cover and take the bulb access cover off from
the top decorative housing as shown in Figure
16.
Replace the defective bulb (15W, 120V AC
CANDELABRA base). Place the bulb access
cover back to the top decorative housing and
secure the screws in position.
1.
2.
REMEMBER to turn off the power.
NOTE
LIGHT BULBS HAVE NO WARRANTY, CAN BE
PURCHASED AT LOCAL LIGHT BULB
SPECIALTY STORE OR FROM OUR SERVICE
CENTER.
Figure 16
Bulbs
Screws
Bulb Access
Cover
Motor Housing
Installing the Decorative
Cover
REMEMBER:
In order to install the decorative
cover, the fan blades must already be attached to
the fan.
Remove 1 of the 3 screws from the mounting
ring, loosen the other 2 screws (Do not
remove). (Fig. 15)
Place the key holes on the decorative plate over
the 2 screws previously loosened from the
mounting ring, turn the decorative plate until it
locks in the place of the narrow section of the
key holes. Secure the decorative plate by
tightening the 2 screws loosened and the one
removed previously. (Fig. 15)
Place the decorative cover and decorative nut
onto the threaded tube of decorative plate and
secure tightly. (Fig. 15)
1.
2.
3.
Figure 15
Screws
Mounting Ring
Decorative Cover
Threaded Tube
Decorative Plate
Decorative Nut
