Assembly
Assembling the light
NOTE:
Light head should fit on a common 4 x 4
inch post. Actual post measurement: 3-5/8
x 3-5/8 in.
4
1
Ƒ
Firmly slide the light assembly (A, B and C) on top of the
post mount (D) until it is flush.
Ƒ
Attach the light and post mount assembly (A, B, C and D)
to the selected post by aligning the post with the opening
in the bottom of the post mount (D). Set the light onto
the post.
Ƒ
Use a pen or pencil to trace the two holes located on
the sides of the post mount (D) onto the post. Remove
the light assembly.
Ƒ
Pre-drill pilot holes onto the post where your pen/pencil
marks were made.
Ƒ
Slide the light and post mount assembly (A, B, C and D)
onto the post. Insert the screws (AA). Tighten until secure.
Mounting on a post
2
Ƒ
Align the tabs on the lens (B) with the ledges on the light
head (A) and turn the light head (A) clockwise until tabs
are secure under ledges.
Ƒ
Align the tabs on the shade (C) with the ledges on the
light head (A) and turn the light head (A) clockwise until
tabs are secure under ledges.
NOTE:
Some parts may come pre-assembled.
A
C
D
AA
