2
Thank you for purchasing this Hampton Bay interior light fixture. This product has
been manufactured with the highest standards of safety and quality.
FEATURES:
1. Use (1) standard (A19) bulb up to 60 watt.
2.
Can be used with any standard, 120 volt, incandescent style dimmer switch.
3.
Designed for mounting to ceilings.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at
1-877-527-0313 or visit www.homedepot.com. Please reference SKU 939-506, UPC
008938102698.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
: Make sure power is turned off at the electrical panel box before beginning
your installation. Turning the power off at the wall switch is not sufficient to prevent
electrical shock.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
1.
Read all instructions prior to beginning the installation process.
2.
Do not install this lighting system in or near a wet location.
3.
CAUTION: HOT SURFACE
. Keep away from curtains and other combustible
materials.
4.
THE BULB IS HOT!
Make sure that the bulb is cool before re-lamping the fixture.
5.
This fixture is intended to be mounted to a 4"square x 2-1/8"deep metal octagon
outlet box. The box must be directly supported by the building structure.
NOTE:
All electrical connections must be in accordance with local codes and the
National Electrical Code. If you are unfamiliar with methods of installing electrical
wiring, secure the services of a qualified licensed electrician.
SAVE THESE INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY&INSTALLATION (not included):
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
(2) Screws (3) Wire connectors Tube assembly Diffuser
ASSEMBLY INSTRUCTIONS (AS SHOWN IN DIAGRAM):
1.
Make sure the main power to the circuit is OFF.
2. Insert the fixture wires through the threaded stem (with decorative sleeve), securing
stem onto the top section of the fabric shade. Insert the fixture wires up through
the top of canopy, turning to tighten as shown.
3. Secure the longer threaded tube into bottom section of the fabric shade.
4.
Install the light bulb.
5.
To install the glass diffuser, remove the decorative cap from the end of the threaded
tube. Install the diffuser and tighten with decorative cap. Note: The hex nut can be
adjusted up and down as needed.
Ladder
Safety
Gloves
Flathead
Phillips
Electrical
Wire
Bulb
Goggles
Screwdriver
Screwdriver
Tape
Cutters
