HAMPTON BAY 792145353171 Скачать руководство пользователя

Страница: 12 / 16

Mounting plate

Light kit

Wire connection
plugs

Bulb

Glass shade

Screws

NOTE

: Before starting installation, disconnect the power by turning off the circuit

breaker or removing the fuse at fuse box.

Turning power off using the fan switch is not sufficient to prevent electric shock.

1. Raise and hold the light kit close to the mounting plate and proceed to do the wire

connections. Connect the white wire connectors from the light kit and fan, follow the
same procedure with the blue and black wire connectors. (Fig. 19)

2. Carefully push all wires back into the mounting plate, then install the light kit onto

the mounting plate with 3 screws provided. Be sure to tighten all screws. (Fig. 19)

3. Install

13 Watt compact fluorescent bulb

(included).

NOTE:

CFL bulbs are NOT dimable.

4. Raise glass shade up against the light kit and secure it to fan by turning glass

clockwise until snug.

DO NOT OVERTIGHTEN.

(Fig. 19)

5. Restore power and your light kit is ready for operation.

Figure 19

NOTE:

Light bulbs have no warranty; can be purchased at any Home Depot store.

Installing the Light Kit 10.

Содержание 792145353171

















Результаты поиска

Содержание 792145353171

Отзывы:

Похожие инструкции для 792145353171

Бренды по названию

Популярные бренды

HAMPTON BAY 792145353171, Руководство пользователя

Результаты поиска

Содержание 792145353171

Отзывы:

Похожие инструкции для 792145353171

Бренды по названию

Популярные бренды