Page 21
ASSEMBLAGE:
Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
4ea Shades (#4)
4ea Socket Rings (#5)
1ea Socket Ring Fastener (#6)
4ea Light Bulbs (#7)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface. Evenly
spread both rods to open the fixture (see Picture C on Page 5).
2. Use the Socket Ring Fastener (#6) to unscrew the Socket Rings (#5) from
the Sockets (#3). Place the Shades (#4) over the Sockets (#3). Use the
Socket Ring Fastener (#6) to screw the Socket Rings (#5) onto the Sockets
(#3) to secure the Shades (#4).
3. Install the four GU10 light Bulbs (#7) (included) in the four Sockets (#3) in
the fixture. To install a Bulb (#7), line up the prongs on the base of the Bulb
(#7) with the matching holes in the Socket (#3) and insert the Bulb (#7) into
the Socket (#3). Next, twist the Bulb (#7) clockwise until the Bulb (#7)
locks into place (about 1/4 to 1/2 turn).
4. Rotate the Curved Arms (#9) as desired (see Picture A on Page 5). To rotate
a Curved Arm (#9), gently hold the Curved Arm (#9) and rotate it to the
desired location (it will not rotate more than approximately 340 degrees).
5. Pivot the Shades (#4) as desired (see Picture B on Page 5). To pivot a Shade
(#4), gently hold the Socket Cover (#8) and pivot it to the desired location
(it will not pivot more than approximately 160 degrees).