7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Safety Information
□
If the connection flow limiting device is triggered mistakenly, close the LP gas cylinder service valve and the burner valve, wait 10
seconds to allow the device to reset, open the cylinder service valve, then open the burner valve and light the fire table as per lighting
instructions.
□
Be sure to protect the hose from any hot surfaces. Serious danger may result if the hose contacts any hot surface. Regular
maintenance of the hose and regulator: Inspect the hose before each use of the fire table. If the hose shows signs of cracks, abrasions,
cuts or damage of any kind, do not operate the fire table. Fix or replace the hose as required before using the fire table. For assistance
with repair or replacement of the hose, call the Customer Service Team at 1-855-HD-HAMPTON. Use only replacement parts from the
manufacturer. Inspect the seal inside the CGA No 791 service valve on the LP gas cylinder when replacing the cylinder or at least once
per year. If there is any indication of damage, have the seal replaced by a certified gas dealer before operating the fire table.
□
Do not use tools to tighten the CGA No 791 connection nut onto the LP gas cylinder service valve. Hand tighten only.
□
Be careful to not cross the threads on the connection when tightening the CGA No 791 connection on to the LP gas cylinder service
valve.
□
A leak test should always be performed after attaching the connection to the LP gas cylinder service valve. (See step 2 in the operation
section of this manual)
□
For the connection of the hose and regulator to the LP tank, refer to step 5 in the Assembly section.
□
LAVA ROCK USE: Do not light or use the gas unit if lava rocks are wet. Ensure lava rocks are completely dry before lighting as intense
heat could cause the lava rocks to crack. Lava rocks could hit somebodys face or eyes during the initial start of this unit, so please
keep away from the fire table for the first 20 minutes.
□
Maximum gas supply pressure is 250 psi.
1 YEAR LIMITED MANUFACTURERS WARRANTY
WHAT IS COVERED
This warranty covers manufacturer defects including any defects in the materials or workmanship.
WHAT IS NOT COVERED
This warranty does not cover damage due to normal wear and tear, weather elements, acts of god, abuse or intentional damage.
Warranty
