![background image](http://html1.mh-extra.com/html/hampton-bay/5lgz1027-1/5lgz1027-1_use-and-care-manual_3634547005.webp)
5
Assembly (continued)
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
5
Securing the canopy
□
To secure the canopy (B) to the frame (A), wrap the
hook and loop straps around the corner ribs and cross beams.
6
Securing the valance
□
Pull down the inside valances of the canopy (B) until they cover the
cross beams of the frame (A). Secure the adjacent valances together
for a clean look.
7
Raising the legs
□
Lift two of the outer legs (1) on the same side of the gazebo and
pull out the inner legs (2) gently until the spring loaded snap
button pops into position. Repeat this step on the remaining two
legs.
The gazebo offers three height levels. To adjust, lift the leg up,
carefully press the snap button on the leg and slowly pull out
the inner leg (2) until the snap button pops into the next position.
Adjust until the desired height level is reached. Repeat on the
other legs.
8
Anchoring the gazebo
□
Stake down the gazebo by driving the four small anchors (AA)
through the hole on each base of the frame (A). This will stabilize the
frame (A) in mild weather conditons.
□
Measure out from the leg to a proper distance and secure
the four big anchors (BB) to ground at a 45 degree angle. Tie
up one end of each guy rope (CC) to the triangular shaped rope
holder located on the outside corners of the canopy (B). Tie the other
end of each rope (CC) to the anchor (BB) on the ground.
Adjust the guy ropes (CC) so that they have the proper tension.
AA
BB
CC
A
B
□
1
2
A
B