5.
Making the Electrical
Connections
Remember
to disconnect the power.
Follow the steps below to connect the fan to your household
wiring. Use the wire connecting nuts supplied with your fan.
Secure the connectors with electrical tape. Make sure there
are no loose strands or connections.
Step 1
Connect the fan supply (black) wire and light supply
(blue) wire to the black household supply wire as shown in
Figure 9.
Step 2
. Connect the netura fan (white) wire to the white
netura household wire.
Step 3
Connect the fan ground wire (green) to the household
ground wire.
Step 4
After connecting the wires, spread them apart so that
the green and white wires are on one side of the outlet box and
the black and the blue wires are on the other side.
Step 5
Turn the connecting nuts upward and push the wiring
into the outlet box.
Figures10 and 11 illustrate the wiring connections for
optional wall control (available at your Hampton Bay Retailer,
the wire color out of wall control may vary, see wall control's
installation manual for correct wire connections.)
NOTE
LIGHT KITS ARE AVAILABLE AT YOU
HAMPTON BAY RETAILER. THE FAN IS
ALREADY WIRED TO SUPPORT THE LIGHT KIT OPTION.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
OTHER PERSONAL INJURY. MOUNT FAN ONLY ON AN
OUTLET BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED
CONTROL DEVICE.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
B
L
A
C
K
W
H
IT
E
W
H
IT
E
B
L
A
C
K
B
L
U
E
G
R
E
E
N
WHITE
BLUE
BLACK
WHITE
Figure 9
Diagram indicates optional light kit wiring.
Figure 8
Safety Cable
INSTALLATION OF SAFETY
SUPPORT
A
n additional safety support is provided to
prevent the fan from falling. Secure the
safety cable to the ceiling joist with screw
and washer, as illustrated in Figure 8.
