Page 2
Thank you for purchasing this Hampton Bay interior portable luminaire. This
product has been manufactured to the highest standards of safety and quality.
The durable finish and hard back shade design provide for care-free
maintenance. Simply wipe with a clean towel to keep looking showroom new.
FEATURES:
1. Durable easy to maintain finish; simply wipe with a clean soft cloth to
keep looking new. This table lamp is part of the matching Bridgeton
collection available at The Home Depot.
2. On/off switch provides just the right amount of light where it is needed.
3. Popular E27 lamp holder may be fitted with a CFL equivalent energy-
saving bulb.
QUESTIONS, PROBLEMS, MISSING PARTS
:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit
www.homedepot.com
. Please reference your
SKU 335-779 Oil Rubbed Bronze Downbridge Table Lamp when speaking to
a Customer Service agent.
CAUTION:
1. Before starting to assemble your portable luminaire, spread all parts out on
a clean flat surface. Inspect each part for defects that may have occurred
during shipping.
Important
: Inspect the wire insulation for any cuts, abrasions or exposed
copper that may have resulted during shipping. If there is a defect in the wire,
DO NOT continue the assembly operation. Please call our Customer Service
Team at 1-877-527-0313.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY:
1 ea - 60-watt maximum
Type A bulb (or CFL equivalent)
(not included)
Page 3
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 ea – Base (A)
1 ea – Tube (B) 1 ea - Body (C)
1 ea – Top Arm (D)
1 ea— Shade (E) 1 ea—Ring (F)
ASSEMBLY INSTRUCTIONS:
1. Screw Top Arm (D) onto
Body (C) until secure. Pull
any excess cord through
Body (C).
2. Screw Body (C) clockwise
into Tube (B) until secure;
pull any excess cord through
Tube (B).
3. Screw Tube (B) clockwise
into Base (A) until secure;
pull any excess cord through
Base (A).
4. Place Shade (E) onto the
socket of the Top Arm (D).
Secure with Ring (F).
5. Install a 60-watt maximum
Type A (or CFL equivalent)
bulb into the socket of Top
Arm (D).
