HAMPTON BAY 296 224, Руководство пользователя

Страница: 7 / 18

FOR VERTICAL SLIDER - TYPE WINDOWS ( Fig .4)
1. Position the fan in the window with the
thermostat control ( D ) facing the center of
the opening .
2. To adjust height , remove fan from window ,
extend the expandable panel ( G ) until it
matches the height of the window .
3. With the window fully open , position the fan
in the window with thermostat control facing
the center of the opening .
4. Fan must fit securely against the inside edge of the window
opening .
5. Slide the sliding window to meet the edge of the fan .
6. Adjust the expandable panel to fill in remaining space between
fan and window frame .
1. Make sure rotary switches are in the OFF position .
2. Plug into 120 V AC electric outlet .
3. Set the individual fan motors on either In ( intake ),
Out ( exhaust ) or Exch ( exchange ) using the control lever .
4. Turn the Thermostat Control to its highest setting
( full clockwise ).
5. To start the unit turn the rotary switches to desired speed:
0=Off, 1=Low, 2=Medium, 3=High.
6. While
the window fan is on , turn the Thermostat Control
counter - clockwise towards the smaller dots until the fan stops
( Away from Cooler ). This is the selected comfort level .
7. If the fan is stopped and you want to turn it back on , turn the
Thermostat Control clockwise until the fan starts , towards the
larger dots ( Towards Cooler ).
Fig. 4
D
G