6
Care and Cleaning
□
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
□
To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly
dampened, clean cloth to wipe the exterior surface of the fixture.
Troubleshooting
Problem
Possible Cause
Solution
The bulb will not light.
The bulb is burned out.
Replace the bulb.
The power is off.
Ensure the power supply is turned on.
The power cord is not plugged in.
Ensure the power cord is plugged into the outlet.
The circuit breaker is off.
Ensure the circuit breaker is set to the "ON" position.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
There are crossed wires, or the power
wire is grounding out.
Discontinue use of the lamp. Check the wire connections.
Contact a qualified electrician or call the Customer Care
Service Team at 1-855-HD-HAMPTON.
Service Parts
MODEL TYPE : 28235 28236
AA
BB
CC
DD
EE
FF
GG
HH
Part
Description
Quantity
AA
Mounting bracket
1
BB
Mounting screw
(Pre-assembled to mounting bracket (AA))
2
CC
Outlet box screw
2
DD
Green ground screw
(Pre-assembled to mounting bracket (AA))
1
Part
Description
Quantity
EE
Hex nut
2
FF
Wire connector
3
GG
Rubber washer
2
HH
Cap nut
2
