8
Assembly (continued)
Insert wood dowel (CC) into the holes in the Left/Right
Side Panel (E/F).
Push Center Front Molding (L) snug to the Left/Right
Side Panel (E/F). Using Bolts (AA) and Washers (BB)
attach panels through pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
Attach Center Back Panel (I) to the back of the completed
assembly from step 4.
Use a Phillips Head Screw Driver, tighten Wood Screws (DD)
through the pre-drilled holes in the Center Back Panel (I).
Insert one Wood Dowel (CC) into each of the pre-drilled
holes on the top edges of the Assembly from step 3.
Then locate Mantel/Top (G) and lay fi nished side up
on top of completed assembly. From the inside, at-
tach Mantel/Top (G) using Bolts (AA) and Washers (BB)
through the pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Using Phillips head screwdriver tighten all Bolts
alternating top and bottom, left and right.
3
5
4
Center front molding installation
Center Back installation
Top installation
L
I
G
