6
Assembly (continued)
3
Assembling the upper fountain
body
4
Connecting the pump to the hose
□
Place the medium upper bowl (F) on top of the pump
housing (E) and twist clockwise to secure in place.
□
Place the small upper bowl support (G) in the center of the
medium upper bowl (F) and twist clockwise to secure in
place.
□
Place the small upper bowl (H) on top of the upper bowl
support (G) and twist clockwise to secure in place.
□
Thread the hose attached to the bottom of the finial (I) down
through the center of the upper fountain assembly until it
reaches the location of the pump (D).
□
Carefully raise the pump housing (E) and connect the hose
to the pump outlet (D).
□
Carefully lower the pump housing (E) back into place.
□
Place the finial (I) on top of the fountain.
5
Filling the fountain with water
□
Using clean and clear water, fill the large bowl (C) until the
pump (D) is fully submerged. The large bowl (C) should be
75% full at minimum. The pump will not work if it is not
completely submerged at all times.
C
E
F
G
H
C
E
D
F
G
H
I
C
D
