10. Operating the Transmitter
9 V
o
lt
B
a
tt
e
ry
Figure 19
Installing the battery:
Install 9 volt battery (not included), to
prevent damage to transmitter, remove the
battery if not used for long periods. (Fig. 17)
Restore power to ceiling fan and test for
proper operation.
1.
" LO, MED, HI"
buttons:
These three buttons are used to set the fan
speed as follows:
LO
= Low speed
MED
= Medium speed
HI
= High speed
2.
"FAN OFF"
button:
This button turns the fan off.
3. The
"LIGHT"
button turns the light ON or
OFF.
NOTE:
This fan and the bulb provided are
designed
NOT
to dim.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, etc.
The Reverse switch is located on top of the
motor assembly. Slide the switch to the Left
for warm weather operation. Slide the switch
to the Right for cool weather operation.
NOTE
: Wait for fan to stop before changing
the setting of the slide switch.
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in
Figure 21. This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 22. This allows you to set your
heating unit on a lower setting without
affecting your comfort.
Figure 20
LIGHT
LO
MED
HI
FAN OFF